Operating Your Pressure Washer - Kärcher K 5.20 M Operating Instruction

4. OPERATING YOUR PRESSURE WASHER

If you have followed all the instructions so far, you are
now ready to have fun cleaning the KARCHER way!!!
• Turn on the supply water and press the Spray Gun lever (No.3) until
the water flows freely and removes all air locks from the hoses.
• You may now attach the bayonet fit Spray Lance (No.4) or required
accessory to the Spray Gun.
All accessories are bayonet fit, simply push in and twist
•
• You can regulate the working pressure on the spray by turning the
nozzle end of the Spray Lance (No.4) in a “+” or “-” direction.
When cleaning painted surfaces, ensure that the paint is sound and
there are no signs or rusting or blistering.
It is your responsibility to check the suitability of the surface to be cleaned.
until they click into position !
cannot be held responsible for any damaged caused.
11