Specifi Cations - Panasonic SC-AK250 Operating Instructions Manual

Specifi cations
AMPLIFIER SECTION
AK350
RMS Output power
THD 10%, both channels driven
1 kHz
(Low channel)
10 kHz
(High channel)
Total Bi-Amp power
AMPLIFIER SECTION
AK250
RMS Output power
For Europe
THD 10%, both channels driven
1 kHz
Total output power
For Australia and N.Z.
THD 10%, both channels driven
1 kHz
Total output power
FM/AM TUNER, TERMINALS SECTION
Preset station
Frequency Modulation (FM)
Frequency range
Sensitivity
S/N 26 dB
Antenna terminal(s)
Amplitude Modulation (AM)
Frequency range
Sensitivity
S/N 20 dB (at 999 kHz)
Music Port input jack
Terminal
Sensitivity
Phone jack
Terminal
CASSETTE DECK SECTION
Track system
Heads
Record/playback
Erasure
Motor
Recording system
Erase system
Tape speed
Overall frequency response (+3 dB, –6 dB) at DECK OUT
NORMAL
S/N Ratio
Wow and fl utter
Fast forward and rewind time
DISC SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3
*
(3) MP3
*
MPEG-1 Layer 3, MPEG-2 Layer 3
Bit rate
MP3
Sampling frequency
MP3
CD-DA
Decoding
Digital fi lter
D/A converter
Pick up
Wavelength
Beam Source
(For Norge)
Bølgelengde
Laserstyrke
Audio output (Disc)
Number of channels
RQTV0196-B.indd 19 RQTV0196-B.indd 19
75 W per channel (3 Ω)
75 W per channel (3 Ω)
300 W
50 W per channel (3 Ω)
100 W
115 W per channel (3 Ω)
230 W
FM 20 stations
AM 15 stations
87.50 to 108.00 MHz (50 kHz step)
4.0 µV (IHF)
2.2 µV
75 Ω (unbalanced)
522 to 1629 kHz (9 kHz step)
560 µV/m
Stereo, 3.5 mm jack
100 mV, 4.7 kΩ
Stereo, 3.5 mm jack
4 track, 2 channel
Solid permalloy head
Double gap ferrite head
DC servo motor
AC bias 100 kHz
AC erase 100 kHz
4.8 cm/s
35 Hz to 14 kHz
50 dB (A weighted)
0.18% (WRMS)
Approx. 120 seconds with
C-60 cassette tape
*
formatted disc)
32 kbps to 320 kbps
32 kHz, 44.1 kHz, 48 kHz
44.1 kHz
16 bit linear
MASH (1 bit DAC)
780 nm
Semiconductor laser
780 nm
Ingen farlig stråling sendes ut
2(Stereo) (FL, FR)
For Australia and N.Z.
USB SECTION
Playable USB Storage Media
1) HDD
2) USB MP3 Player/Digital Audio Player
3) USB Thumbdrives
Supported audio fi le format
MP3 bit rate
USB memory port
Maximum current
Bit rate
MP3
Sampling frequency
MP3
Audio output (MP3)
Number of channels
Frequency response (MP3)
S/N Ratio
USB unit out
SPEAKER SECTION
Type
Speaker(s)
Woofer
Tweeter
Impedance
HIGH
LOW
Input power (IEC)
HIGH
LOW
Output sound pressure level
Cross over frequency
Frequency range
Dimensions (WxHxD)
Mass
SPEAKER SECTION
Type
Speaker(s)
Woofer
Tweeter
Impedance
Input power (IEC)
Output sound pressure level
Cross over frequency
Frequency range
Dimensions (WxHxD)
Mass
GENERAL
Power supply
For Continental Europe
For the United Kingdom, Australia and N.Z.
Power consumption
For Continental Europe
For the United Kingdom, Australia and N.Z.
Dimensions (WxHxD)
Mass
For Continental Europe
8 fs
For the United Kingdom, Australia and N.Z.
Operating temperature range
Operating humidity range
Power consumption in standby mode:
Note:
1. Specifi cations are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
3. The labels "HIGH" and "LOW" on the rear of the speakers
AK350
refer to High frequency and Low frequency.
AK250
32 kbps to 320 kbps
32 kHz, 44.1 kHz, 48 kHz
2 channels
20 Hz to 20 kHz (0+/-1.0 dB)
AK350
2 way, 2 speaker system (Bass refl ex)
16 cm cone type
6 cm cone type
75 W (Max)
75 W (Max)
85 dB/W (1.0 m)
2.5 kHz, 10 kHz
30 Hz to 28 kHz (–16 dB)
35 Hz to 29 kHz (–10 dB)
219 x 330 x 196 mm
AK250
2 way, 2 speaker system (Bass refl ex)
16 cm cone type
6 cm cone type
50 W (Max)
84 dB/W (1.0 m)
35 Hz to 30 kHz (–16 dB)
23 Hz to 34 kHz (–10 dB)
219 x 330 x 196 mm
AC 230 V, 50 Hz
AC 230 to 240 V, 50 Hz
AK350
AK250
250 x 330 x 323 mm
AK350
AK250
+5 to +35 °C
5 to 90 % RH (no condensation)
0.5 W (approx.)
500 mA
85 dB
3 Ω
3 Ω
2.6 kg
3 Ω
2 kHz
2.6 kg
90 W
: 90 W
: 95 W
: 7.1 kg
: 6.3 kg
7.1 kg
19
RQT8043
2/23/07 4:49:43 PM 2/23/07 4:49:43 PM