Maintenance; When Moving The Unit - Panasonic SC-AK250 Operating Instructions Manual

Troubleshooting guide (continued)
Disc trays
Disc tray(s) cannot open.
"CHGR ERR" is displayed.
Remote control
Remote control doesn't work.
USB
No response when [¶, REC] button
is pressed.
The USB drive or its contents
cannot be read.
Slow operation of the USB fl ash
drive.
"USB OVER CURRENT ERROR"
"NO PLAY"
Memory reset (Initialization)
When the following situations occur, refer to the instructions below to reset the memory:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
To reset memory
1 Disconnect the AC mains lead. (Wait at least 3 minutes before proceeding to step 2)
2 While pressing and holding down [y/I] on the main unit, reconnect the AC mains lead.
"– – – – – – – – –" appears on the display.
3 Release [y/I].
All the settings are returned to the factory preset.
You will need to reset the memory items.

Maintenance

If the surfaces are dirty If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.

When moving the unit

Remove all discs.
1
2 Press [y/I] to turn the unit off.
Disconnect the AC mains lead.
3
18
RQT8043
RQTV0196-B.indd 18 RQTV0196-B.indd 18
Press [y/I] to release the jammed tray(s) as the unit will switch off. Switch it on
again and the tray(s) will initialize to the previous tray(s) condition.
If this still does not fi x the problem, please consult the dealer.
Check that the batteries are inserted correctly. 7
Replace the batteries if they are worn.
Disconnect the USB device and then reconnect it back. Alternatively, turn the
unit off and then back on.
The USB drive format or its contents is/are not campatible with the system. (
The USB host function of this product may not work with some USB devices.
USB devices with storage capacity of more than 8 gigabytes may not work in
some instances.
Large fi le size or high memory USB fl ash drive takes longer time to read.
The USB mass storage device rating exceeds 500mA. Disconnect the USB
device. Turn the unit off and then back on.
Check the content.
Only MP3 format fi les can be played.
For a cleaner crisper sound (cassette deck) For a cleaner crisper sound (cassette deck)
Clean the heads regularly to assure good quality playback
and recording. Use a cleaning tape (not included).
2/23/07 4:49:42 PM 2/23/07 4:49:42 PM