Espi Config Commands; Adapter - Motorola RFS7000 Reference Manual

23-2 Motorola RF Switch CLI Reference Guide

23.1.1 adapter

ESPI Config Commands

Enables/disables a specified adapter or all adapters
Supported in the Following Platforms:
• RFS6000
Syntax
adapter <name> [activate|port <3000-3100>]
Parameters
name
Usage Guidelines
Use
[no] (adapter) <name>(activate)
Example
RFSwitch(config-espi)#adapter aeroscout port 3040
RFSwitch(config-espi)#
SWITCH NOTE: This command is not supported in:
• WS5100
• RFS7000
Application side protocol implemented by adapter.
• activate – Activates/enables ESPI adapter
• port <3000-3100> – Configures ESPI adapter listening
port
to disable the specified adapter