Table of Contents
Advertisement
8-2 Operation Mode Setting
• In the operation mode setting, you can select the operation mode (Maximum self-consumption mode / Programmed
charge/discharge time mode / Back-up mode) for the stand-alone system.
* If you are using a remote-control system, the specified operation mode will only take effect when the remote-control is
disabled.
• Refer to 8-1 to select the operation mode setting in the user setting mode [no- 1].
• Press "MENU (ENTER)" to switch to the display mode in the operation mode setting.
The current operation mode of the system is displayed.
• Press "MENU (ENTER)" in the display mode to switch to the setting mode. The LED will blink.
• Press "DATA (▲)" and "CLOCK (▼)" while the LED is blinking to cycle through the setting items.
• Press "MENU (ENTER)" to complete the setting and switch to the display mode.
• Press "ON/OFF (CANCEL)" to cancel the setting and switch to the display mode.
• Press "ON/OFF (CANCEL)" in the display mode to return to the item display [no- 1].
User setting mode
(Item select)
Operation mode setting
16
Operation Mode Selection
Display mode
Show the
current setting
SELF: Maximum self-consumption mode
ProG: Programmed charge/discharge time mode
bu: Back-up mode
Setting mode
or
Advertisement
Table of Contents
