Connections - Panasonic SC SC-HC3 Operating Instructions Manual

Connections

Portable audio equipment
Portable audio player
Note
• Adjust the volume and sound quality of this unit and the other equipment. Reduce the level of input signal (for example, by switching off the
equalizer or reducing the volume) of the other equipment before connection. High levels of input signal will distort the sound.
• For details, refer to the instruction manual of the other equipment.
75Ω LOOP
FM ANT
1
1 Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position with the least
amount of interference.
Connect the AM loop antenna.
2
1
2
3
Black
White
Red
Keep the loose antenna cord away from other wires and cords. Do
not screw too tightly. Otherwise, the screwdriver goes around in
circles and cannot be fixed.
4
(Cords and equipment not included)
Plug type:
Ø3.5 mm
(1/8") stereo
AUX
EXT
LOOP ANT
AM ANT
GROUND
2
Adhesive tape
FM indoor antenna
AM loop antenna
Use a Phillips-head
screwdriver, etc.
Stand the antenna
up on its base.
Click!
Start playback from the
portable audio source.
Headphones
AC IN
3
Connect the AC power supply cord.
3
Connect the AC power supply cord
after all other connections are
complete.
To household
AC outlet
Note
To save power when the unit is not to be used for a long time,
unplug it from the household AC power supply cord. You will
need to reset some memory items after plugging in the unit.
Conserving power
The unit consumes approx. 0.08 W even when it is turned
off with [8, POWER]. To save power when the unit is not
to be used for a long time, unplug it from the household AC
outlet. Remember to reset the radio stations and any other
memory items before using the unit again.
REMOTE
MAIN UNIT
CONTROL
➡
(not included)
Reduce the volume level and connect the
headphones.
Plug type: Ø3.5 mm (1/8") stereo.
Note
• Avoid listening for prolonged periods of
time to prevent hearing damage.
• Excessive sound pressure from
earphones and headphones can cause
hearing loss.