Uv Detection Function; Magnetic Detection Function - AccuBANKER AB-5000 MG/UV User Manual

&
a) UV Detection Function (ultraviolet)
Counterfeit notes that do not generate fluorescence under the ultraviolet rays can be detected
when this function is selected.The machine will stop and the error message “CF1” will be shown on
the Batch Number Display.The UV detection function is selected by pressing the UV button (the UV
Indicator lit).
Note:
The UV Indicator can be lit in two colors. When in red, it means that the UV Function is normal.
When the indicator is green, it means that the brightness of the UV lamp is low. In this case you
must select a proper fluorescent detection sensitivity to get the desired results.This can be
achieved by sliding the sensitivity lever located in the back of the unit to the highest position (the
fluorescent detection sensitivity has four positions). If the machine stops because a counterfeit
note is detected, remove it, press the RESTART button to clear the error message and recount all
the notes placed in the stacker.
b) MG Detection Function (magnetic)
In this mode, the machine will detect counterfeit notes by magnetic detection proofing. When a
counterfeit note is detected, the machine will stop and the error message “CF2” will be shown on the
Batch Number Display.
The MG detection function is selected by pressing the MG button (the MG indicator lit). To clear the
MG function, press the MG button until the indicator turns off.
Note:
When the machine stops because a counterfeit note is detected, take it away, press the RESTART
key to clear the error message and recount all the notes placed in the stacker.
In case the FAST speed is selected, the detected note will be the one before the last one.