JVC LT-47DV1BU Instructions Manual page 45

Problem
Is the TV connected correctly to the aerial?

Change the direction of the indoor aerial.

Check digital channels signal with "Signal

Check". (P. 39)
"Missing or weak
If you still cannot watch the digital channels

signal"
after following the steps above, there may
be a problem with your aerial or its cable. Or,
the signal may be too weak.
Consult your retailer.
Æ
While watching TV, the message appears

"The timer will start
when a timer programme is about to start,
soon"
indicating that the channel will be switched.
You can update the software downloaded by

"Software Update"
Over air download (P. 48)
Some digital channels cannot be watched on

No picture, no sound
this TV. (P. 45)
When the clock is
Change the "Time Zone" setting. (P. 34)

off time
ENGLISH
Actions
Getting started
Problem
Album / Title / Artist
/ Year does not
display or display
correctly (Music)
Duration time does
not display or display
correctly (Music)
This is not a malfunction
 When the TV is turned on, it will take approx. 18 seconds to properly
produce picture and sound.
When the TV is turned on by turning the main power switch on or by

plugging to the AC outlet, it will take approx. 15 seconds until the TV
is ready to receive any commands.
Basics Advanced
Actions
Make sure to use ID3v1 tag.

 Duration time cannot be calculated for MP3
that contains the artwork.
The duration time is calculated from the bit

rate and the file size, the time displayed may
differ from the actual playback time. Higher
the compression rate and lower the bit rate
/ sample rate is these error margins will be
greater.
Etc.