JVC LT-47DV1BU Instructions Manual page 14

Initial settings
The initial settings will begin automatically when the TV is turned on for the
very first time. Follow the on-screen instructions to perform the settings.

Turn on the main power switch on the rear side of the TV.
(P. )
On

Turn the TV on
The power lamp on the TV lights
 If the remote control doesn't work, confirm that the mode is set to
"TV".

Select a Menu language
Select a language for on-screen displays.
> Menu Language
Step 1: Please select Language 1/3
English
Deutsch
Français
Italiano
Castellano
Català
Nederlands
Dansk
Svenska
Norsk
 If the "Menu Language" does not appear, refer to "Factory Setting"
(P. 39) or "Retuning" (P. 39) for channel settings.
1 select
2 set

Select a country *
Select the country of installation. Receivable digital channels will differ
depending on the "Country" setting.
>> Country
Step 2: Please select Country 1/2
Austria
Belgium
Switzerland
Czech Republic
Germany
Denmark
Spain
Finland
France
United Kingdom
Note
* To select a country that not listed, refer to (P. 1).

Select a system language
Select a language for audio, subtitle, and EPG.
The system language will differ depending on selected country.

>>> System Language
Step 3: Please select Language
German

Select place of installation
Select "Home", for use at home.
>>>> Place of Installation
Step 4: Please select Place of Installation
Home
Shop with Auto Demo.
Shop
Setting up your TV
1 select
2 set
1 select
2 set
1 select
2 set