Using The Menu - JVC LT-47DV1BU Instructions Manual

PR Installation menu (continued)
Signal Check
Signal: Poor < Acceptable < Excellent
Signal Check
6
Service
Channel 69
22
1 D RTL Television
32
2 RTL2
D
To check another
61

69
broadcast channel
Signal : Acceptable
Signal Quality 50
Signal Strength 44
The "Channel" is the frequency of the digital broadcasting. It differs from

the channel number displayed on the TV.
PC Position
PC Position
Reset
Factory Setting
Are you sure you want to delete the PR list and
reset all settings?
Yes No
The TV will switch off when reset is completed.
Please switch the TV back on.
1 select "Yes"
Initial setting will start again.
"Initial settings" (P. 13)
2 start
Select "Yes" in "Factory Setting" (will enter standby), then turn on from

standby and start the "Initial settings" (P. 13).
Check the broadcast signal
1 select
2 set
Adjust the position of the PC image
Reset
adjust 
Initialise the settings
Retuning menu
You can set the TV to restart the initial setting. For details refer to step 3 in
"Initial setting" (P. 13)
Using the menu functions