Operating The Television; Changing The Main Unit And Remote Control - Panasonic SC-PT 250 Operating Instructions Manual

Operating other equipment (continued)
Optional USB connection and operation (continued)
Compatible Devices
Devices which are defi ned as USB mass storage
•
class:
– USB devices that support bulk only transfer.
– USB devices that support USB 2.0 full speed.
Supported Formats
Still pictures
Music
Video
*1
It may not be possible to play all the fi les due to the condition on
how they were created.
*2
For Panasonic D-Snap/DIGA.

Operating the television

Operating the television
You can use the remote control to operate a Panasonic
television.
Aim the remote control at the television.
To switch the television on or off
To switch the television's video input mode
Adjust the volume

Changing the main unit and remote control

Changing the main unit and remote control
The remote control and main unit are factory-set to
"REMOTE 1" mode.
If your remote control affects other equipment during
operation, you can switch to operate in "REMOTE 2" mode.
To switch to "REMOTE 2" mode
1
While pressing and holding [
"REMOTE 2" appears on the main unit display.
2
To operate in "REMOTE 2" mode
+
(Press and hold for 2 seconds)
34
RQT8043
File name File extension
*1
.jpg .jpeg
JPG
MP3 .mp3
WMA .wma
*2
.asf
MPEG4
¡ ¢
/ ] on the main unit
Note
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or which require
additional program installation when connected to a PC are not
supported.
• A device using NTFS fi le system is not supported.
[Only FAT 12/16/32 (File Allocation Table 12/16/32) fi le system is
supported].
• Depending on the sector size, some fi les may not work.
• It will not operate with Janus enabled MTP (Media Transfer
Protocol) devices.
• Maximum folder: 256 folders
• Maximum fi le: 4000 fi les
• Maximum fi le name: 12 characters
• Maximum folder name: 12 characters
• Only one memory card will be selected when connecting a multi-
port USB card reader. Typically the fi rst memory card inserted.
To play audio from your television through your home
theater system
Preparation
Connect your equipment referring to "Connect to the
various television terminals" (\ page 11).
For Continental Europe
Press [EXT-IN] to select "AV" as the source. Then reduce
the volume on the television to its minimum, and control the
volume on this main unit.
For Southeast Asia, Thailand, the Middle East, South Africa,
Saudi Arabia and Kuwait
Press [EXT-IN] to select "AUX" as the source. Then reduce
the volume on the television to its minimum, and control the
volume on this main unit.
Note
• The remote control may not work properly with some models.
• You can enjoy 5.1-channel surround sound when you turn on
Super Surround (MOVIE, MUSIC) (\ page 29).
To return to "REMOTE 1" mode
Perform steps 1 and 2 but use [1] instead of [2] for both
steps. ("REMOTE 1" appears on the main unit during step
1.)
The remote control cannot work with the main unit if
their modes are different.
"REMOTE 1" or "REMOTE 2" appears on the main unit
display when you operate the remote control.
• If "REMOTE 1" appears (The main unit is in "REMOTE 1"
mode.)
Press and hold [ENTER] and [1] on the remote control for
at least 2 seconds.
• If "REMOTE 2" appears (The main unit is in "REMOTE 2"
mode.)
Press and hold [ENTER] and [2] on the remote control for
at least 2 seconds.
Note
You can still operate a television using the remote control
(\ see above) even after switching the mode.