Figure 7. Installing The Monitor Shroud
10. Snap the screen into the visor mounting shroud Screw the screen to the visor mounting
shroud using the 4 screws (supplied).
11. Install the 4 screw caps (supplied) in the holes on the 4 corners of the assembly.
12. Reinstall the sun visor in its original position using the attaching hardware removed in
step 1. of this installation procedure.
13. Route the power/signal harness from the sun visor down the A-Pillar and behind the
dashboard for connections to the video equipment and/or backup camera.
Figure 8. Installing The Monitor
6