Safety Precautions - Panasonic EW-DL82 Operating Instructions Manual

Sonic vibration toothbrush
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Safety precautions
To reduce the risk of injury, loss of life, electric shock, fire,
malfunction, and damage to equipment or property, always
observe the following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the level
of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
DANGER
WARNING
CAUTION
The following symbols are used to classify and describe the type
of instructions to be observed.
This symbol is used to alert users to a specific operating
procedure that must not be performed.
This symbol is used to alert users to a specific operating
procedure that must be followed in order to operate the
unit safely.
EW-DL82_EU.indb
5
Denotes a potential
hazard that will result in
serious injury or death.
Denotes a potential
hazard that could result
in serious injury or death.
Denotes a hazard that
could result in minor injury.
DANGER
This product has a built-in rechargeable battery.
Do not throw into fire, apply heat, or charge, use, or
leave in a high temperature environment.
- Doing so may cause overheating, ignition, or explosion.
WARNING
Immediately stop using and remove the power plug
if there is an abnormality or failure.
- Failure to do so may cause fire, electric shock, or injury.
<Abnormality or failure cases>
• The main unit or charger is deformed or
abnormally hot.
• The main unit or charger smells of burning.
• There is abnormal sound during use or charging of
the main unit or charger.
- Immediately request inspection or repair at an authorized
service center.
Always ensure the appliance is operated on an
electric power source matched to the rated voltage
indicated on the charger.
Fully insert the power plug.
- Failure to do so may cause fire or electric shock.
Regularly clean the power plug to prevent dust from
accumulating.
- Failure to do so may cause fire due to insulation failure
caused by humidity.
Disconnect the power plug and wipe with a dry cloth.
5
2013/10/15
10:46:20

Advertisement

Table of Contents
loading

Table of Contents