Starting / Stopping The Engine - Stihl FS 56 Instruction Manual

Starting / Stopping the
Engine
Controls
Version with Bike Handle
2
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and 0 = Stop
positions.
FS 56, FS 56 R, FS 56 C, FS 56 RC
Version with Loop Handle
3
3
1 Throttle trigger lockout
1
2 Throttle trigger
3 Stop switch with Run and 0 = Stop
positions.
Function of stop switch and ignition
system
The stop switch is normally in the Run
position, i.e. when it is not depressed:
The ignition is switched on – the engine
is ready to start. If the stop switch is
moved to the 0 position, the ignition is
switched off. The ignition is switched on
again automatically after the engine
stops.
1
2
Starting the Engine
4
Press the manual fuel pump
N
bulb (4) at least five times – even if
the bulb is filled with fuel.
Cold engine (cold start)
5
Press in the choke lever (5) and turn
N
it to g at the same time.
Warm engine (warm start)
5
Press in the choke lever (5) and turn
N
it to < at the same time.
English
23