Argox amigo series User Manual page 39

LED Indicators: Power and Ready LEDs blink alternately
Power LED Ready LED
ON OFF
OFF ON
Possible Problems Solutions
Ribbon out Supply the ribbon roll
Ribbon jam Recover the jam
Ribbon sensor Replace ribbon
error sensor
LED Indicators: Only the Power LED blinks
Power LED Ready LED
ON ON
OFF ON
Possible Problems Solutions
Serial IO error Check the baud rate Not for Centronics
Memory full Add the extension
RAM
Cutter failed, or Check the cutter
jam at cutter
Recover the jam
Hardware error Call for service
Remarks
Not applicable to
direct thermal
type.
Remarks
Occurs only when
installing or setting
the cutter
77
LED Indicators: Only the Ready LED blinks
Power LED Ready LED
ON ON
ON OFF
Possible Problems Solutions
Print head too hot Printing will stop until
the print head cools to
an acceptable printing
temperature. When it
does, the printer will
automatically resume
operation.
Remarks
78