Panasonic WV-CW864A Operating Instructions Manual page 11

Position Setting (P. 18)
Preset Identification Setting
(P. 20)
Light Control Setting (P. 21)
Dwell Time Setting (P. 21)
Scene File Setting (P. 21)
Preset Speed (P. 22)
Zone Number Selection (P. 27)
Zone Parameter Setting
(P. 27)
Setting for ON (NESW) (P. 28)
Setting for ON (USER) (P. 29)
Area Title Display (P. 29)
Learning Display (P. 30)
Alarm IN/OUT Setting (P. 31)
Cleaning Display (P. 32)
Chroma Level Setting (P. 40)
Aperture Level Setting (P. 40)
Pedestal Level Setting (P. 40)
Resolution (P. 40)
Digital Noise Reduction
(P. 41)
BW Mode (P. 41)
PIX OFF Setting (P. 42)
To Restore the Camera Default
Position (P. 42)
Camera Resetting (P. 42)
Preset ID Editing (P. 18)
Super-D2 OFF (P. 35)
Super-D2 ON (P. 35)
Manual Iris Adjustment (P. 35)
Shutter Speed (P. 36)
Gain Control (P. 36)
Electronic Sensitivity
Enhancement (P. 36)
White Balance (P. 38)
Motion Detector (P. 39)
Auto Focus (P. 40)
B/W AUTO/ON/OFF (P. 41)
B/W Auto Sensitivity Level
(P. 41)
B/W Auto Duration Time Setting
(P. 41)
Pixel SENS UP (P. 41)
Burst (BW) Setting (P. 41)
-11-
Manual Level Adjustment
(Contrast) (P. 36)
Manual Mask Area Selection
(P. 35)
Manual Level Adjustment
(AWC) (P. 38)
Manual Level Adjustment
(ATW1, ATW2) (P. 38)
Sensitivity Level Adjustment
(P. 39)
Mask Area Selection (P. 39)
Demonstration Display
Unit Number (P. 43)
Sub Address (P. 43)
Baud Rate (P. 43)
Data Bit (P. 43)
Parity Check (P. 43)
Stop Bit (P. 43)
X On/X Off (P. 43)
Wait Time (P. 43)
Alarm Data (P. 43)
Delay Time (P. 43)