Troubleshooting - Panasonic WV-CW480S Operating Instructions Manual

Troubleshooting

Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution
or if the problem is not described below.
Symptom
No image is displayed.
Images are displayed
blurry.
The power cord insulation
is damaged.
The power cord gets hot
during use.
The power cord gets hot
when bent or stretched.
Cause/solution
• Is 24 V AC or 12 V DC power sup-
ply connect to the power supply
terminal? (WV-CW484F)
• Is 220 V to 240 V AC power sup-
ply connect to the power supply
terminal? (WV-CW480S)
• Is the video output cable connect-
ed to the video connector of the
monitor?
→ Confirm the cables are firmly
connected.
• Are the brightness and contrast of
monitor properly adjusted?
→ Confirm the monitor.
• Aren't there dusts or dirt on the
lens?
→ Check if there are dust or dirt
on the lens.
• Is the focus adjusted correctly?
→ Check if the focus is adjusted
correctly.
• The power cord is worn out. This
may result in electric shock or a
fire. Shut off the power, and refer
to qualified service personnel.
Reference
pages
22
–
–
20
–
43