Registering The Remote Control Codes For Playback Devices - Yamaha RX-V779 Supplement Manual

SOURCE RECEIVER
SOURCE z
SOURCE
HDMI
1 2 3 4
RECEIVER
5 V-AUX
AV
Input selection key
1 2 3 4
5 6 AUDIO TUNER
BLUETOOTH USB NET PHONO
MAIN MAIN ZONE 2 ZONE 2 PARTY PARTY HDMI OUT HDMI OUT
SCENE SCENE
BD BD
TV TV NET NET RADIO RADIO
DVD DVD
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
ON ON
SCREEN SCREEN OPTION OPTION
ENTER Menu operation keys
RETURN DISPLAY
DISPLAY
BAND
MODE MODE
External device
TUNI TUNING PRESET
operation keys
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 2 3 4
Numeric keys
5 6 7 8
MEMORY
9 0 10 ENT
TV
TV operation keys
INPUT
TV z
TV VOL TV CH
MUTE CODE SET CODE SET
Registering the remote control codes for
playback devices
You can use the unit's remote control to operate playback devices if
you have registered their remote control codes. You can also use
the input selection keys to change the playback devices that are
controlled by the remote control, because their remote control
codes are assigned to the input selection keys.
1
See "List of remote control codes" (p.6) to find the
remote control code for your playback device.
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
2
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
3
Press the input selection key.
For example, press HDMI 1 to set the remote control code
for the playback device connected to the HDMI 1 jack.
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is registered successfully, SOURCE
blinks twice.
If it blinks six times, registration has failed. Repeat from Step 2.
• For details on how to register a remote control code to a SCENE key, see
"Changing the external device assigned to the SCENE keys" (p.4)
■
Playback device operations
Once you have registered the remote control code for your
playback device, you can control it using the following keys after
selecting the input source or scene.
• By pressing SOURCE or RECEIVER, you can switch the devices (the unit or
external device) that are operated by the menu operation keys, DISPLAY and
numeric keys. You can operate the unit after pressing RECEIVER (lights up in
orange), and an external device after pressing SOURCE (lights up in green). For
example, if you register the remote control code of your external device on
TUNER, you can operate the unit's built-in FM/AM radio after pressing RECEIVER
and the external device after pressing SOURCE.
SOURCE z
Turns on/off the playback device.
Cursor keys Select an item.
Menu operation
ENTER Confirms a selected item.
keys
RETURN Returns to the previous screen.
DISPLAY Switches information on the display.
TOP MENU Displays the top menu.
POP-UP/MENU Displays the pop-up menu.
s
Stops playback.
d
Stops playback temporarily.
External device Starts playback of the selected
a
operation keys song/video.
h
Searches forward/backward (by
holding down).
j
f
Skips forward/backward.
g
Numeric keys Enter numerical values.
TV operation keys Control the TV (p.2).
• These keys work only if the corresponding function is available on your playback
device and if the device can be operated with an infrared remote control.
3
En