Section 3 – Configurations
DIAGNOSTICS
This page shows the result of your router's self diagnostic and connection test results. The Internet connectivity status will only show
if you
PASS
have correctly configured your Internet connection and your router is currently online.
To access the DIAGNOSTICS setting window, click on the Diagnostics button under the MAINTENANCE tab..
INTERNET CONNECTIVITY CHECK
Choose the Virtual Circuit interface and then click on the Rerun
Diagnostic Tests button to run the diagnostics again.
Notice: The Diagnostic Test window is used to test connectivity
of the Router. A Ping test may be done through the local or
external interface to test connectivity to known IP addresses. The
diagnostics feature executes a series of test on your system
software and hardware connections. Use this window when
working with your ISP to troubleshoot problems.
D-Link DSL-2640B User Manual
87