Setting Procedures - Panasonic GP-US522HA Operating Instructions Manual

SETTING PROCEDURES

1. Camera Identification
(CAMERA ID)
You can use the camera identification (CAMERA ID) to
assign a name to the camera. The camera ID consists of
up to 16 alphanumeric characters. You can select whether
to have the camera ID displayed on the monitor screen or
not.
CAMERA ID
FLD/FRM
ELC
SHUTTER
GAIN
SYNC
BLACK BAL
SCENE FILE
END
To edit the CAMERA ID
1. Move the cursor to the CAMERA ID parameter.
2. Press the PAGE button. The CAMERA ID menu
appears. The cursor on the letter "A" starts blinking.
Character Cursor
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789
().,'":;&#!?=
+-*/%$
*POSI RET END RESET
Editing Cursor ................
3. Move the character cursor to a character you want by
pressing ITEM, A or B.
4. After selecting the character, press the PAGE button.
The selected character appears in the editing area.
(The editing cursor in the editing area moves to the
right automatically at this moment.)
5. Repeat the steps above until all characters are edited.
To enter a blank space in the CAMERA ID
Move the character cursor to SPACE and press the
PAGE button.
To edit a specific character in the CAMERA ID
1. Move the character cursor to
PAGE button to move the editing cursor to the charac-
ter to be edited in the editing area.
2. Move the character cursor to the character area and
select a new character.
3. Press the PAGE button to set the CAMERA ID.
13
** SET UP **
*OFF
FLD
*OFF
OFF
AUTO
INT
ABC
*SCENE1
SPACE
or then press the
To erase all characters in the editing area
Move the character cursor to RESET and press the PAGE
button. All characters in the editing area disappear.
To determine the display position of the CAMERA ID
1. Move the cursor to POSI, and press the PAGE button.
The display shown below appears and the CAMERA
ID starts blinking.
Blinking
2. Move the CAMERA ID to the desired position by press-
ing A, B or the ITEM button.
3. Press the PAGE button to fix the position of the CAM-
ERA ID. The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the monitor
screen.
• The CAMERA ID moves faster if any of A, B or
the ITEM button is kept pressed for a second or
longer.
Character
Area
To return to the SETUP menu
Move the cursor to RET and press the PAGE button. The
Command
SETUP menu appears.
Editing
To display the CAMERA ID on the monitor screen
Area
Move the cursor to CAMERA ID in the SETUP menu and
select ON.
2. Field/Frame Charging Mode Setting
(FLD/FRM)
You can select the charging mode from FIELD or FRAME.
GP-US522
** SET UP **
CAMERA ID *OFF
FLD/FRM FLD
ELC *OFF
SHUTTER OFF
GAIN AUTO
SYNC INT
BLACK BAL ABC
SCENE FILE *SCENE1
END