Connections - Panasonic AW-E600 Operating Instructions Manual

CONNECTIONS

Caution:
The connection and installation should be done by qualified service personnel or system installers.
Refer any servicing to qualified service personnel.
CONNECTION OF DEVICE WITH A COMPOSITE INPUT CONNECTOR
• Connection to any device which has a composite input connector, such as a video monitor or a VCR, must be made
through the VIDEO OUT Connector.
• Power supply to the camera must be through the optional DC power supply Cable AW-CA4T1.
• For DC power supply, use the optional AC adaptor AW-PS505.
MENU
ITEM/AWC
YES/ABC
NO/BAR
Cautions
1. Connect this to a DC 12 V class 2 power supply only.
2. To prevent fire or shock, the UL listed wire VW-1, style 1007 should be used as for the cable for DC 12 V Input
Connector.
75 Ω coaxial cable
OPTION CARD
VIDEO OUT
I/F REMOTE
G/L IN
VIDEO OUT
Connector
IRIS
DC12V IN
DC Power supply
Cable AW-CA4T1
VIDEO IN
FUSE(POWER)
POWER
FUSE
OFF O I ON
FUSE
125V 3.15A
POWER
AC Adaptor AW-PS505
-14-
Video monitor
AC Adaptor PS505
AW-