After Cleaning - Bissell SPOTCLEAN CORDLESS 1570 series User Manual

Operations
Cleaning with the 3-n-1 Stair Tool (select models)
This versatile 3-way tool sprays, scrubs, and
suctions up dirt and stains from the outer
curves, corner, and tread of carpet staircase.
1. Attach the tool to the end of the hose. (You
will hear a click when it is properly attached).
2. Press the power button to turn on SpotClean.
3. Twist the tool head to desired setting to clean
carpeted stair. The downward facing edge is the
active cleaning mode.
a. Use the flat area to clean top of stairs
b. Use indented area to clean outer corner
(nose) of stairs
c. Use pointed edge to clean inside crevice
4. Ensure the tool spray tip is pointing
downward. Pressing trigger, slowly move the
tool back and forth over the soiled surface
keeping the tool in contact with the carpet.
5. Release trigger and move tool slowly over
the soiled area to suction up water and dirt.
6. Continue to clean the area until no more
dirt can be removed.
7. After use, tool can be easily cleaned by
removing the front faceplate. Rinse out tool
before storing.

After cleaning

1. Turn off machine.
2. To flush the tools and hose before storage,
suction up a bowl of clean water to ensure all
debris is removed.
3. Empty and rinse the dirty water tank after
each use, OR when dirty water reaches the
indicated maximum fill line.
a. To remove the dirty water collection tank,
simply lift up on the tank from the base of
the machine.
b. Pull tab to remove plug from tank
c. Rinse out dirty tank with clean water
after emptying.
4. Empty remaining formula and water from the
clean tank and rinse with water before storage.
5. Disconnect the cleaning tool from the hose
grip by pushing down on button lock and pulling
straight off. (Do NOT twist tool to remove it).
6. Check spray nozzle for accumulated dirt or debris.
If necessary, clean with soft bristle brush.
7. The float stack can be removed from the dirty
tank for cleaning. Turn it counter-clockwise to
remove it. Rinse with water until all debris is
removed. Replace the float stack in the dirty
tank and turn clockwise to lock.
a. b.
1
FLAT
7.
3.
3b.
1.
c.
2 3
CREVICE
NOSE
www.BISSELL.com
7