Cleaning The Exterior; Operating Environment - HP dat72 5242 User Manual

Section 1: General Information
4.3.1.3 Eject the magazine and write the date on the label of the cleaning cartridge so that yopu
Note:
4.3.2 Cleaning Cartridge Life
If the Clean Me message still appears on the autoloader's LCD after you use the cleaning cartridge, the
cleaning cartridge might have expired. If so, discard the cartridge and repeat the operation with a new
cleaning cartridge.
4.4

Cleaning the Exterior

4.4.1 Enclosure:
Use a soft, damp, lint-free cloth to clean the enclosure.
Caution:
4.4.2 LCD:
Put household glass cleaner on a soft cloth and wipe the screen.
Caution:
4.5

Operating Environment

The 5242 and 5242-ACL tape drives operate in any clean, indoor location. Do not store or operate the tape
drive outside of the environmental ranges listed in Chapter 6.
4.5.1 Avoid placing the tape drive in direct sunlight, rain or other sources of moisture
4.5.2 Keep all the tape drive ventilation openings unobstructed.
HP StorageWorks DAT 72 (Models 5242 and 5242-ACL) User's Guide
have a record of usage. Do not use the cleaning cartridge more times than specified by the
manufacturer.
Leaving the cleaning cartridge in the magazine reduces the amount of data you can back
up to the magazine however, leaving the cleaning cartridge in the magazine ensures that
the tape drive is cleaned prior to running a long job.
Do not use aerosol sprays, solvents, or abrasives that might damage the finish.
Avoid getting moisture in any openings.
Do not spray the cleaner directly on the LCD because the liquid might drip into
the tape drive.
24 HP Part Number 528296-03 July 2005