Picture Menu; Picture Mode; Contrast; Brightness - Panasonic PT-LB75VU Operating Instructions Manual

PICTURE menu

PICTURE menu
Navigating through the MENU (
select PICTURE from the main menu and then
select the required item from the sub-menu.
Set the selected item with ◄►buttons.
z
Remote control

PICTURE MODE

Depending on the projection environment, you can
optimize the image projection.
Change setting
Press◄►buttons to cycle through the options.
STANDARD
NATURAL WHITE BOARD
STANDARD Setting for general image
Setting for brightness and
DYNAMIC

sharpness

Setting for when projecting on a
BLACKBOARD
blackboard
Setting for when projecting on a
WHITE BOARD
white board
Reproducing the original color of
NATURAL
the image
Remarks
It may take a while until the selected mode is
z
stabilized.

CONTRAST

You can adjust the contrast of the projected image.
Lower

BRIGHTNESS

You can adjust the brightness of the projected image.
Darker
E
30 - NGLISH
page 27),
Æ
Control panel
Change setting
DYNAMIC
BLACKBOARD
Higher
Brighter

COLOR

You can adjust the color saturation of the projected
image. (Available with signals of S-VIDEO/VIDEO/
RGB (Moving image)/YP
B
Lighter

TINT

You can adjust the skin tone in the projected image.
(Available with signals of S-VIDEO/VIDEO/RGB
(Moving image)/YP P only)
B R
More reddish
SHARPNESS
You can adjust the sharpness of the projected image.
Less sharp
Remarks
The adjustable range depends on the input signal.
z

WHITE BALANCE

You can adjust the white balance more properly in 3
colors temperature.
(Available with signal of RGB (Still image) only)
-1
Press▲▼buttons to cycle through the options.
Advanced menu item
WHITE BALANCE RED
WHITE BALANCE GREEN
WHITE BALANCE BLUE

COLOR TEMPERATURE

You can adjust the white balance of the projected image.
Change setting
DEFAULT HIGH
DEFAULT Balanced white
HIGH More bluish
LOW More reddish
P only)
R
Darker
More greenish
More sharp
+1
Default
0
0
0
Change setting
LOW