Settings; Menu Navigation; Navigating Through The Menu - Panasonic PT-LB75VU Operating Instructions Manual

Menu Navigation

Navigating through the MENU

Operating procedure
J
1 ) Press the MENU button.
The main menu is displayed.
PICTURE MODE
PICTURE
CONTRAST
POSITION
LANGUAGE BRIGHTNESS
DISPLAY OPTION COLOR
PROJECTOR SETUP
TINT
SECURITY SHARPNESS
NETWORK
COLOR TEMPERATURE
DAYLIGHT VIEW
STILL MODE
RETURN
NOISE REDUCTION
SELECT
TV-SYSTEM
ENTER
2 ) Press ▲▼ to scroll to the required
main menu item and press the ENTER
button to select.
Select the required menu item from the
PICTURE, POSITION, LANGUAGE, DISPLAY
OPTION, PROJECTOR SETUP, SECURITY
and NETWORK *
1 menu. The selected item is
highlighted in orange and displays the sub-menu
on the right.
PICTURE KEYSTONE
POSITION SHIFT
LANGUAGE
OVER SCAN
DISPLAY OPTION
ASPECT
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
3 ) Press the ENTER button.
You can select a sub-menu item.
PICTURE KEYSTONE
POSITION SHIFT
LANGUAGE OVER SCAN
DISPLAY OPTION ASPECT
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT
ENTER
4 ) Press ▲▼ buttons to scroll to the
required sub-menu item and press ◄►
buttons or the ENTER button to adjust.
The selected item is called up and the other menu
items disappear from the screen.
KEYSTONE
If there is a lower level, the next level will be
displayed.
*1: PT-LB90NTU only
Remarks
Press the
z
previous menu. Press repeatedly to escape from
the menu mode and return to the projection.
Some items and functions may not be adjusted or
z
available, depending on the selected input signals.
Some settings are adjustable without any signals.
z
STANDARD
Called up item will disappear after 5 seconds
z
without any operation and return to the menu mode.
For the sub-menu items, see "Sub-menu" in the
z
"ON-SCREEN MENU". (
DEFAULT
AUTO
J
OFF
OFF
AUTO
You can reset most of the customised settings to the
factory defaults by pressing the DEFAULT button of
the remote control.
Press
The operation depends on the screen displayed
currently.
Q
Q
Remarks
You cannot reset all the settings at a time to the
z
factory default settings.
To reset all the settings to the factory defaults, see
"INITIALIZE ALL" in the "PROJECTOR SETUP
menu". (
Some menu items are not available to reset by
z
pressing the DEFAULT button. Adjust each menu
item manually.
The triangle mark under the bar indicates factory
z
default setting and the square indicates the current
setting.
The triangle mark position varies by the selected
input signals.
Menu Navigation
MENU or RETURN button to return to the
Æ
Resetting to the factory default

settings.

button.
While the sub-menu screen is displayed:
The items of the sub-menu displayed currently are
reset to the factory default settings.
While the called up item screen is displayed:
Only the item adjusted currently is reset to the fac-
tory default setting.
KEYSTONE
page 42)
Æ
Current setting
Default setting
page 28)
E
NGLISH - 27