Replacing Front Parking Lamp And Turn Signal Bulbs; Replacing Sidemarker Bulbs - Mercury mariner 2009 Owner's Manual

5. Disconnect the electrical
connector from the bulb.
WARNING: Handle a
halogen headlamp bulb
carefully and keep out of
children's reach. Grasp the bulb
only by its plastic base and do not
touch the glass. The oil from your
hand could cause the bulb to
break the next time the
headlamps are operated.
6. Connect the electrical connector on the new bulb.
7. Insert the glass end of the new bulb into the headlamp assembly.
When the grooves in the plastic base are aligned, turn the new bulb
clockwise to install.

Replacing front parking lamp and turn signal bulbs

For bulb replacement, see your authorized dealer.

Replacing sidemarker bulbs

1. Make sure the headlamp switch is
turned to the off position.
2. Push the lamp rearward and pull
the front edge of the lamp outward
to remove it from the fender.
3. Rotate the bulb socket
counterclockwise, replace the bulb
and reinstall the bulb socket.
4. To reinstall the lamp, place the
front edge of the lamp in the hole
and push the lamp inward to lock it in place.
2009 Mariner (mrn)
Owners Guide, 1st Printing
USA (fus)
Lights
51