Adjusting The Picture Adjustment - Pioneer AVH-P7550DVD Operation Manual

Basic Operations
JUST (just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizontally
to the ends, enabling you to enjoy a 4:3 picture
without sensing any disparity even on a wide
screen.
CINEMA (cinema)
A picture is enlarged by the same proportion as
FULL or ZOOM in the horizontal direction and by
an intermediate proportion between FULL and
ZOOM in the vertical direction; ideal for a cine
ma sized picture (wide screen picture) where cap
tions lie outside.
ZOOM (zoom)
A 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cine
ma sized picture (wide screen picture).
NORMAL (normal)
A 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
Notes
! Different settings can be memorized for each
video source.
! When video is viewed in a wide screen mode
that does not match its original aspect ratio, it
may appear differently.
! Remember that using the wide mode feature
of this system for commercial or public view
ing purposes may constitute an infringement
on the authors rights protected by the Copy
right Law.
! Video will appear grainy when viewed in
CINEMA or ZOOM mode.
! The backup camera picture is always FULL.
Adjusting the picture
adjustment
You can adjust BRIGHT (brightness),
CONTRAST (contrast), COLOR (color) and
HUE (hue) for each source and back up cam
era.
! The adjustments of BRIGHT and
CONTRAST are stored separately for light
ambient (daytime) and dark ambient (night
time). A sun or moon
the left of BRIGHT and CONTRAST, respec
tively, as the ambient light sensor deter
mines brightness or darkness.
! You cannot adjust HUE for PAL video.
! You cannot adjust COLOR and HUE for the
audio source.
1 Press MENU on the head unit and hold
to display PICTURE ADJUST.
Press MENU until PICTURE ADJUST appears
in the display.
# You cannot use MENU on the remote control.
2 Touch any of the following touch panel
keys to select the function to be adjusted.
The adjustment function names are displayed
and adjustable ones are highlighted.
! BRIGHT  Adjust the black intensity
! CONTRAST  Adjust the contrast
! COLOR  Adjust the color saturation
! HUE  Adjust the tone of color (red is em
phasized or green is emphasized)
! DIMMER  Adjust the brightness of display
! B.Camera  Switch to the picture adjust
ment display for the back up camera
! SOURCE  Return to the picture adjustment
display for each source
# You can adjust the picture adjustment for
back up camera only when BACK UP CAMERA is
turned on. (Refer to Setting for back up camera on
page 84.)
# SOURCE will appear in the display instead of
B.Camera when you touch B.Camera.
Section
04
is displayed to
21
En