Extended Network Configuration; Vendor Specific: Vlan Discovery And Dls Address - Siemens OpenStage 20 Administration

2.3.6

Extended Network Configuration

To have constant access to network subscribers of other domains, you can enter a total of two
more network destinations. For each further domain/subnet you wish to use, IP addresses for
the domain and gateway, and a subnet mask must be entered. The option's name and code are
as follows:
• option #33 „Static Routing Table"
For manual configuration of specific/static routing see Section 3.3.5, "Specific IP Routing".
Also the DNS domain wherein the phone is located can be specified by DHCP. The option's
name and code are as follows:
• option #15 „Domain Name"
For manual configuration of the DNS domain name see Section 3.3.6.1, "DNS Domain Name".
2.3.7

Vendor specific: VLAN Discovery and DLS address

If the phone is to be located in a VLAN (Virtual LAN), a VLAN ID must be assigned. In case the
VLAN shall be provided by DHCP, VLAN Discovery must be set to „DHCP" (see Section
3.2.2.1, "Automatic VLAN discovery (DHCP)").
If a DLS (Deployment Service) server is in use, its IP address must be provided. It is recom-
mended to configure the DLS server address by DCHP, as this method enables full Plug & Play:
having received the DLS address from DHCP, the phone will contact the DLS during startup.
Provided that the DLS is configured appropriately, it will send all necessary configuration data
to the phone. Additionally, this method is relevant to security, as it ensures the authenticity of
the DLS server.
For manual configuration of the DLS server address see Section 3.3.7, "Configuration & Update
Service (DLS)".
For the configuration of vendor-specific settings by DHCP, there are two alternative methods:
1) the use of a vendor class, or 2) the use of DHCP option 43.
A31003-O1010-M100-3-76A9, 12/09/2007
HiPath 8000 - OpenStage Family, Administrator Manual
inbetriebnahme.fm
Startup
Quick Start
2-11