Zanussi ZWQ 570 SO User Manual page 5

pliance will ignore the new selected pro-
gramme. The "Start/Pause" pushbutton flashes
red for a few seconds.
Selecting the spin speed
Press the "Spin" pushbutton to change the spin
speed.
The maximum spin speeds are :
for Cotton, Eco, Synthetics, Easy iron, Hand-
wash, Wool, Sport : 900 rpm (ZWQ590SO),
800 rpm (ZWQ580/585SO), 700 rpm
(ZWQ570/575SO), for Delicates : 700 rpm.
At the end of the programme, if you have selec-
ted "Rinse hold"
"Spin" or "Drain"
the cycle and empty the water.
Selecting options
You must select the different options after se-
lecting the programme and before pressing the
"Start/Pause" button (see "Washing pro-
grammes"). Press the desired button(s) : the
corresponding lights come on. If pressed again,
the lights go out. If one of the options is not
compatible with the selected programme, the
"Start/Pause" button flashes red.
"Prewash" option (Prewash)
The appliance runs a prewash at 30°C max.
"Super quick" option (Super quick)
The washing time will be reduced depending
on the programme selected.
"Rinse plus" option
The washing machine will add one or more rin-
ses during the cycle. This option is recommen-
ded for people with sensitive skin and in soft
water areas.
"Delay start"
This option allows you to delay the start of a
wash programme by 3, 6 or 9 hours by press-
ing the "Delay start" pushbutton.
You can change or cancel the delayed start
time at any time before you press the "Start/
Pause" pushbutton by pressing the "Delay
start" pushbutton again (when all indicators are
off, the wash programme will start immediately).
www.zanussi.com
, you then need to select a
programme to finish
If you have already pressed the "Start/Pause"
pushbutton and you want to change or cancel
the delayed start, proceed as follows :
• To cancel the delay start and start the cycle
immediately, press "Start/Pause" and then
"Delay start". Press "Start/Pause" to start the
cycle.
• To change the timer delay period, you must
go through the "Stop" position
programme your cycle.
The lid will be locked during the delayed start
time. If you need to open it, you must first pause
the appliance by pressing the "Start/Pause"
pushbutton. After closing the lid again, press
the "Start/Pause" pushbutton.
Start of the programme
Press the "Start/Pause" button to start the cy-
cle. The corresponding light will come on
green. It is normal for the programme selector
to remain stationary during the cycle. The light
corresponding to the current cycle is illumina-
ted.
+ : Prewash + Wash
+ : Rinses + Spin
: End of cycle
The drain pump can operate for a short
time when the appliance fills water.
Interrupting a programme
Adding washing during the first 10 mi-
nutes
Press the "Start/Pause" pushbutton : the corre-
sponding light will flash green while the appli-
ance is paused. The lid can only be opened
around 2 minutes after the washing machine
has come to a stop. Press the "Start/Pause"
pushbutton again to continue the programme.
Modifying the programme in progress
Before making any changes to the current pro-
gramme, you need to pause the washing ma-
chine by pressing the "Start/Pause" pushbut-
ton. If the modification is not possible, the
"Start/Pause" pushbutton flashes red for a few
seconds. If you still decide to change the pro-
gramme, you must cancel the current pro-
gramme (see below).
Cancelling the programme
and re-
5