Displaying And Maintaining Wlan Service - HP a-msr Configuration Manual

To do...
5. Enable access permission for
802.1 1n clients only.
6. Enable the short GI function.
7. Enable the A-MSDU function.
8. Enable the A-MPDU function.
For information about MCS index and mandatory and supported 802.1 1n rates, see the chapter ―WLAN
RRM configuration."
The following matrix shows the feature and router compatibility:
Feature
802.11n

Displaying and maintaining WLAN service

To do...
Display WLAN client information.
Display WLAN service template
information.
Display WLAN client statistics.
Cut off clients.
Use the command...
client dot11n-only
short-gi enable
a-msdu enable
a-mpdu enable
A-MSR900 A-MSR20-1X
Available for
routers with a
SIC_WLAN
No
module that
supports
802.11n
Use the command...
display wlan client { interface
wlan-radio [ radio-number ] |
mac-address mac-address |
service-template
service-template-number }
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
display wlan service-template
[ service-template-number ] [ |
{ begin | exclude | include }
regular-expression ]
display wlan statistics client { all |
mac-address mac-address } [ |
{ begin | exclude | include }
regular-expression ]
reset wlan client { all |
mac-address mac-address }
A-MSR20 A-MSR30
Available for Available for
routers with a routers with a
SIC_WLAN SIC_WLAN
module that module that
supports supports
802.11n 802.11n
Remarks
Available in any view
Available in any view
Available in any view
Available in user view
18
Remarks
Optional.
By default, an 802.11gn radio
permits both 802.11b/g and
802.11gn clients to access.
Optional.
Enabled by default.
Optional.
Enabled by default.
The device receives but does not
send A-MSDUs.
Optional.
Enabled by default.
A-MSR50
Available for
routers with a
SIC_WLAN
module that
supports
802.11n