Advertisement
Operation Guide 5472
To turn the hourly time signal on and off
1. In the Alarm Mode, use D to select the hourly time
Hourly time signal on
signal.
indicator
2. Press A to toggle it on and off.
The hourly time signal on indicator is shown on the
display in all modes while this function is turned on.
E-20
To confi gure the countdown timer
1. While the countdown start time is on the display in the
Countdown Timer Mode, hold down A until the current
countdown start time starts to fl ash, which indicates the
setting screen.
2. Press C to move the fl ashing in the sequence shown
below to select other settings.
C
3. When the setting you want to change is fl ashing, use D (+) and B (–) to change
the fl ashing item.
To specify a countdown start time of 24 hours, set
4. Press A to exit the setting screen.
E-22
Stopwatch
The stopwatch lets you measure elapsed time, split times,
Seconds
and two fi nishes.
The display range of the stopwatch is 23 hours,
59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero after
it reaches its limit, until you stop it.
The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to elapsed
1/100 second
time measurement.
Hours : Minutes
All of the operations in this section are performed in
the Stopwatch Mode, which you enter by pressing C
(page E-5).
E-24
Adjusting Hand Positions
The watch hands can go out of alignment with the time
Hour hand
on the digital display if it is exposed to strong magnetism
Minute hand
or impact. If this happens, you should adjust the hand
positions.
All of the operations in this section are performed in the
Hand Setting Mode, which you enter by pressing C
(page E-5).
Important!
You do not need to perform the operation below as long
as the analog hands indicate the same time as the digital
Hour : Minutes
display.
1. In the Hand Setting Mode, hold down A for about one
second.
This will cause the displayed hour and minutes to start
to fl ash. This is the setting screen.
E-26
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Analog Hands (Hour, Minute)
In all modes, the hands indicate the Home City hour and minute.
E-28
C
Hours
Minutes
C
Seconds
.
Countdown Timer
The countdown timer can be set within a range of one
Seconds
second to 24 hours. An alarm sounds when the countdown
reaches zero.
All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-5).
1/10 second
Hours : Minutes
To use the countdown timer
Press D while in the Countdown Timer Mode to start the
countdown timer.
When the end of the countdown is reached, the alarm
sounds for ten seconds or until you stop it by pressing
any button. The countdown time is reset to its starting
value automatically when the alarm sounds.
Press D while a countdown operation is in progress to
pause it. Press D again to resume the countdown.
To stop a countdown operation completely, fi rst pause
it (by pressing D), and then press A. This returns the
countdown time to its starting value.
To measure times with the stopwatch
Elapsed Time
D
D
D
Start
Stop
Resume
Split Time
D
A
A
Start
Split
Split release
(SPL displayed)
Two Finishes
D
A
D
Start
Split
Stop
First runner
Second runner
fi nishes.
fi nishes.
Display time of
fi rst runner.
2. Use D (+) to change the hour hand and minute hand positions so they match the
digital time.
Holding down D moves the hands clockwise at high speed.
While holding down D to move the hands at high speed, press B to lock the
hands in high speed movement. To stop locked high-speed hand movement,
press any button.
3. After the hands are the way you want, press A to exit the setting screen.
Map and Digital Dial
Hour hand Minute hand
Second hand
Digital dial
Map: In all modes, the map shows the current World Time City time zone.
− Note however that the map shows the current Home City time zone while the
Timekeeping Mode setting screen (page E-8) is displayed.
Digital dial: In all modes, segments indicate the current World Time hour, minute,
and second.
E-21
E-23
D
A
Stop
Clear
D
A
Stop
Clear
A
A
Split release
Clear
Display time of
second runner.
E-25
E-27
Map
E-29
Hide quick links:
Advertisement
