Panasonic PT 56DLX76 Operating Instructions Manual page 38

Projection Display operation (continued)
Using the CH/ VOL Button
Select desired channel:
Press CH or NUMBER keys.
Adjust to desired volume level:
Press VOL + or VOL -.
Notes:
• The channel number and volume level are stored even after
the unit is turned off.
• Power consumption can be reduced if the volume level is
lowered.
Channel and Program Tuning
Channel and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub-channels within a single channel. When
tuning to a digital channel, the unit will also tune to a
program and will indicate the channel and program in the
on-screen Channel Banner display.
In order to select channels properly, Auto program must
be performed. (p. 33)
Follow the procedure below to directly enter the channel
number using the NUMBER keys on the Remote
Control.
Select analog channel
1
2
Note:
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Select digital channel
1
2
38
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Press the NUMBER keys on
the Remote Control to enter the
Channel number. Press OK.
The following is an example of
tuning to channel 15.
Direct Tuning Example
Channel Banner
Step Action
1 Press 1
2 Press 5
3 Press OK
If tuning a digital channel and your
channel contains more than one
program, press PROG and enter
the program (1, 2, 3 etc.) using the
NUMBER keys. Press OK. The
following is an example of tuning to
channel 15-1.
3
4
Note:
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Unit Status display
Press the Channel
the MENU screen is dis played, to display current unit
status information.
Channel Banner: Minimized
Note:
• The Station identifier is not displayed when you use Split
Display
Screen mode.
1
15
15
Channel Banner: Maximized
Channel, Program and Station identifier
15-2
ABC - HD
Closed Caption
Direct Tuning Example
Step Action
1 Press 1
2 Press 5
3 Press -
4 Press 1
5 Press OK
or RECALL button, except when
Press CH to minimize the
displayed channel banner. It
will display the channel number,
and the station identification (if
available).
Press RECALL to maximize the
displayed channel banner.
Ending time Program title
- 10:30 Andrew' s cooking show
CC SAP TV-G 1080I Standard
Rating Picture mode
Level
SAP Signal resolution
Channel Banner
Display
1
15
15-
15-1
15-1
Channel Number
15-2
ABC - HD
Station Identifier
Clock
10:00 am
30
4 : 3
Sleep Timer
remaining time
Aspect ratio