Panasonic PT 56DLX76 Operating Instructions Manual page 34

Tuning channels (continued)
4
5
6
7
After Auto program is complete, the unit will return
to Manual program mode. To place the channels
that were located by auto scan in memory, move the
cursor to "Apply" and press OK. (p. 34-36)
If OK is not pressed after selecting APPLY, the
channels will not be memorized.
Notes:
• If "Cable" or "Antenna" is selected and a CableCARD™ is not
inserted, Auto program will perform Scan All.
• If "Cable" is selected and a CableCARD™ is inserted, Auto
scan will not be available.
• Some channels with very weak signals may be locked into
memory. If desired, these channels can be deleted man u al ly
using the "Manual program setting". (p. 34)
• "Auto program" must be done when you select the input
signal for the first time or whenever you change the antenna
configuration.
34
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Press to select "ANT In".
Press to select "Antenna" or
"Cable".
Auto program
ANT In ◄ Cable
Mode All
Start scan
Press to select "Mode".
Press to select "All" or
"Analog".
Auto program
ANT In Cable
Mode ◄ All
Start scan
Press to select "Start scan".
Press to start Scan.
Now scanning analog channel...
Progress
Manual program setting
Use this procedure when changing setting of
receiving channels or changing the channel dis play.
Also, use to add or delete channels from channel list
manually.
Press MENU to display the Main Menu screen.
1
►
►
2
3
Note:
• If Lock (p. 50) has been set, you must enter your password to
display the Manual Program screen.
Press to select "Setup" icon.
Press to display the Setup
menu.
Menu
Picture
Audio
Timer
Lock
TVG / Photo
Setup
Press to select "Program
channel".
Press to display the Program
channel menu.
Setup
CH scan All
Language
Clock
Program channel
Input labels
CC
Press to select "Manual".
Press to enter the Manual
program screen.
Program channel
Auto
Manual
Signal meter