Wireless Settings - D-Link DWR-111 User Manual

Section 3 - Configuration
This section will help you to manually configure the wireless settings of your router. Please note that changes made in this section may also need
to be duplicated on your Wireless Client.
WIRELESS NETWORK SETTINGS
Enable Wireless:
Select this checkbox to enable wireless
access. When you set this option, the
following parameters take effect.
Wireless Network
Also known as the SSID (Service Set Identifier),
Name:
this is the name of your Wireless Local Area
Network (WLAN). Enter a name using up to
32 alphanumeric characters. The SSID is case-
sensitive. The default name is "dlink_DWR-111".
802.11 Mode: B/G/N mixed: Enable this mode if your network
contains a mix of 802.11b and 802.11g devices.
G mode: Enable this mode if your network has
only 802.11g devices. If you have both 802.11b
and 802.11g wireless clients, disable this mode.
Auto Channel Scan:
A wireless network uses specific channels in the
wireless spectrum to handle communication
between clients. Some channels in your area
may experience interference from other
electronic devices. Choose the clearest
channel to help optimize the performance
and coverage of your wireless network.
D-Link DWR-111 User Manual

Wireless Settings

25