Setting (Resetting) Date And Time - Tanita rd-901 InnerScan Dual Instruction Manual

Setting (Resetting) Date and Time

1. Set Date
While the power is off, press the
Press the buttons to set year and then press the
Set the month and date in the same way.
Note:
• When the power is switched on for the first time, the date and time
setting screen can also be displayed by pressing the
• When you have replaced the batteries, the date and time setting
screen can also be displayed by pressing the
2. Set Time
Press the buttons to set hour and then press the
Set the minutes in the same way.
The set date and time are displayed in order, and then the power automatically turns off.
Note:
• If the Body Composition Monitor is not operated for 60 seconds or more,
the power will turn off automatically. Settings will not be saved in this case.
• If you make a mistake or wish to turn the platform off before you complete the settings,
press the button to turn the platform off. Settings will not be saved in this case.
• To change the date or time settings, press and hold the
when the power is off, and then follow the procedure above to change the date or time settings.
8
button to start setting.
button.
buttons.
buttons.
button.
button for 3 seconds
(Not required if connection to the iPhone is complete)