Table of Contents
Advertisement
Changing the Weighing Unit
Note: Only for use with models that have the unit switching button.
The weighing unit can be changed using the switch on the back of the monitor.
Press the SET button when the display is blank. When "0.00kg" (or "0.0lb", "0.0stlb") appears on the display, press the Unit
Switching button underside of the monitor to switch the weighing unit.
Note: If weighing unit is set to pounds or stone-pounds, the height programming mode is automatically set to feet and inches.
Similarly, if kilograms is selected, height is automatically set to centimeters.
Setting (Resetting) Date and Time
1. Set Date
Insert batteries into the monitor and then press any button
to start the Year setting. Press the Up/Down buttons to set
year and then press the SET button. The monitor beeps
once to confirm.
2. Set Hour
Press the Up/Down buttons to set the hour and then press
the SET button.
The monitor beeps once to confirm.
3. Set Minute
Press the Up/Down buttons to set the minute and then
press SET button.
The monitor beeps twice to confirm the settings.
The power then shuts down automatically.
Note:
• After you replace the batteries or if you want to reset the date and time, press and hold the Down button to begin the date and
time programming process. Replacing the batteries causes the date and time settings to be lost.
• 60 seconds or more of inactivity during this process cause the monitor to shut off automatically. No settings are saved in this case.
• If you make a mistake or wish to turn the monitor off before you complete the settings, press the OFF button to turn the monitor off.
No settings are saved as a result.
en
5
Advertisement
Table of Contents
