Honda 1996 Prelude Owner's Manual page 169

Lights
Replacing a Rear License Bulb
1. Remove the two screws and
remove the license light assembly.
2. Remove the lens from the rubber
seal and the metal cover.
3. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
Maintenance
4. Turn on the parking lights and
check that the new bulb is
working.
5. Reinstall the cover and the lens.
Put the license light assembly in
place. Reinstall the two screws and
tighten them securely.
Replacing a Ceiling Light Bulb
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file or
a small flat-tip screwdriver. Do not
pry on the edge of the housing
around the lens.
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.