Honda 1996 Prelude Owner's Manual page 140

RESERVE TANK
HOLDER
4. Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant, then put the
tank back in its holder.
5. When the coolant stops draining,
tighten the drain plug in the
bottom of the radiator. Apply non-
hardening sealant to the drain bolt
threads and reinstall the bolt in
the engine block. Tighten it
securely.
FILLER NECK
RESERVE
TANK CAP
6. Mix the recommended antifreeze
with an equal amount of purified
or distilled water in a clean
container. The cooling system
capacity is:
With manual transmission:
(U.S.: S, Canada: S)
3.5 l (0.92 US gal, 0.77 Imp gal)
(U.S.: Si, Canada: SR)
3.8 l (1.00 US gal, 0.84 Imp gal)
(U.S.: VTEC, Canada: SR-V)
4.0 l (1.06 US gal, 0.88 Imp gal)
Fill up to here
Cooling System
With automatic transmission:
(U.S.: S, Canada: S)
3.4 l (0.90 US gal, 0.75 Imp gal)
(U.S.: Si, Canada: SR)
3.7 l (0.98 US gal, 0.81 Imp gal)
7. Pour coolant into the radiator up
to the base of the filler neck.
Maintenance
CONTINUED