Honda 1996 Prelude Owner's Manual page 163

Lights
3. Turn the lock ring counterclock-
wise (about one-quarter turn) to
unlock the headlight bulb.
4. Remove the bulb by pulling it
straight out of its recess.
5. Install the new bulb with the
electrical connector pointing down.
Make sure all three tabs on the
bulb are seated in their slots in the
headlight.
6. Turn the lock ring clockwise to
lock the bulb in place. Do not force
the ring. Check the seating of the
bulb's tabs if the ring will not
return to its original position.
7. Reinstall the harness connector on
the bulb connector. Make sure it
locks in place.
Turn on the headlights to test the
new bulb.
8. (Passenger's side)
Reinstall the radiator reserve tank.
Maintenance
Replacing a Parking Light Bulb
1. Use a Phillips-head screwdriver to
remove the screw from the top of
the fender.
SCREW
2. Move the parking light assembly
forward until it slides out of the
body.
3. Turn the socket one-quarter turn
counterclockwise to remove it
from the lens.