Handlebar Switches - Yamaha 2010 XVS1100Z Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
4
1. Pass switch " "
2. Dimmer switch " /
3. Horn switch " "
4. Turn signal switch " /
Right (XVS1100Z)
1. Engine stop switch "
2. Start switch " "
EAU12348 Right (XVS1100AZ)
1. Engine stop switch "
2. Hazard switch "
3. Start switch "
"
Pass switch "
"
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
leased, the switch returns to the center
/ "
/ "
"
"
EAU12350
"
EAU12400
/ "
" for the high
" for the low beam.
EAU12460
/ "
". To signal a left-hand
". When re-
4-7
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Engine stop switch " /
Set this switch to " " before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter. See page 6-1 for start-
ing instructions prior to starting the en-
gine.
Hazard switch " " (XVS1100AZ)
With the key in the "ON" or "
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
turn signal lights).
EAU12500
EAU12660
"
" to
EAU12711
EAU12733
" posi-