PERIODIC MAINTENANCE AND MINOR REPAIR
1. Fuse box (× 2)
Replacing the fuses
The fuse boxes are located behind
panel B. (See page 6-6 for panel re-
moval and installation procedures.)
6
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
1. Main fuse
2. Spare main fuse
EAU01749
3. Headlight fuse
4. Ignition fuse
5. Signaling system fuse
6. Carburetor heater fuse
7. Spare fuse (× 2)
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
Specified fuses:
Main fuse:
Ignition fuse:
Signaling system fuse:
Headlight fuse:
Carburetor heater fuse:
CAUTION:
_
Do not use a fuse of a higher amper-
age rating than recommended to
avoid causing extensive damage to
the electrical system and possibly a
fire.
_
3. Turn the key to "ON" and turn on
4. If the fuse immediately blows
30 A
10 A
10 A
15 A
10 A
6-32
the electrical circuit in question to
check if the device operates.
again, have a Yamaha dealer
check the electrical system.
EC000103