Prosthetics/Laboratory - Zebra GX430t Instruction Manual

32
Prosthetic Fabrication at the Implant Level:

Prosthetics/Laboratory

pRoD. No. DEsCRIpTIoN
AbUTmENTs FoR sINGlE TooTh
REsToRATIoNs AND bRIDGEs
FRIADENT EstheticBase Angled / A15
Screw for EstheticBase (D 3.0 with abutment screw
4
•
462221 – D 3.0/GH 1
• 4
462222 – D 3.0/GH 2
• 4
462223 – D 3.0/GH 3
• 4
462225 – D 3.0/GH 5
4
•
462231 – D 3.4/GH 1
• 4
462232 – D 3.4/GH 2
• 4
462233 – D 3.4/GH 3
• 4
462235 – D 3.4/GH 5
4
•
462241 – D 3.8/GH 1
• 2
462242 – D 3.8/GH 2
• 2
462243 – D 3.8/GH 3
• 2
462245 – D 3.8/GH 5
2
•
462251 – D 4.5/GH 1
• 2
462252 – D 4.5/GH 2
• 2
462253 – D 4.5/GH 3
• 2
462255 – D 4.5/GH 5
2
•
462261 – D 5.5/GH 1
• 2
462262 – D 5.5/GH 2
• 2
462263 – D 5.5/GH 3
• 2
462265 – D 5.5/GH 5
2
Abutment Screws
•
464304 FRIADENT Standard Abutment Screw
••••
464305 FRIADENT Screw for EstheticBase (Slotless)
•••• 4
454305 FRIADENT Standard Abutment Screw (Slotted)
D 3.0).
4
D 3.0 (Slotless)
4
pRoD. No. DEsCRIpTIoN
AbUTmENTs FoR sINGlE TooTh
REsToRATIoNs AND bRIDGEs
Horizontal Screws
464403 FRIADENT Horizontal Screw Set, Standard
with horizontal screw standard and horizontal screw seat
4
464404 FRIADENT Horizontal Screw Set, Long
with horizontal screw long and horizontal screw seat
4
464407 FRIADENT Transverse Screw Set, Standard
with transversal screw standard and horizontal screw seat
4
464408 FRIADENT Transverse Screw Set, Long
with transversal screw long and horizontal screw seat
4
464401
FRIADENT Horizontal Screw, Standard
4
464402 FRIADENT Horizontal Screw, Long
4
464405 FRIADENT Transverse Screw, Standard
4
464406 FRIADENT Transverse Screw, Long
4
454410 FRIADENT Horizontal Screw, Seat
8
Horizontal screws are seated with the 0.9 mm FRIADENT Hex Driver (see page 42).
For molars, we recommend using the long head from the horizontal or transverse
screw set, as the crown usually requires broader buccal-lingual width.
Ceramic Abutments
FRIADENT CeraBase Abutment
with standard abutment screw .
4
•
452530 – D 3.4 Conical
• 30/4
452531 – D 3.4 Anatomical
30/4
•
452540 – D 3.8 Conical
• 30/3
452541 – D 3.8 Anatomical
30/3
•
452550 – D 4.5 Conical
• 30/3
452551 – D 4.5 Anatomical
30/3
•
452560 – D 5.5 Conical
• 30/3
452561 – D 5.5 Anatomical
30/3
We recommend using the FRIADENT CeraBase Tool Set (455750) for prepping the
ceramic sleeve of the FRIADENT CeraBase Abutment (see page 43). The grinding
process does not require irrigation. The abutment can be veneered directly with
Allceram (Ducera), VM7 (Vita), or equivalent.
33
8
8
8
8