Impressions - Zebra GX430t Instruction Manual

28
Prosthetic Fabrication at Implant Level:

Impressions

pRoD. No. DEsCRIpTIoN
FRIADENT Transfer Coping (Transfer Technique)
with standard abutment screw (D 3.0 with
4
abutment screw D 3.0) and TransferCap
4
•
451620 – D 3.0/GH 3
• 4
451621 – D 3.0/GH 5
4
•
451630 – D 3.4/GH 3
• 4
451631 – D 3.4/GH 5
4
•
451640 – D 3.8/GH 3
• 2
451641 – D 3.8/GH 5
2
•
451650 – D 4.5/GH 3
• 2
451651 – D 4.5/GH 5
2
•
451660 – D 5.5/GH 3
2
•
451661 – D 5.5/GH 5
2
FRIADENT Transfer Coping (PickUp Technique)
with PickUp Guide Pin (D 3.0 with PickUp
4
Guide Pin D 3.0) and TransferCap (D 3.0 – D 5.5)
4 20
•
451625 – D 3.0/GH 3
• 4
451622 – D 3.0/GH 5
4
•
451635 – D 3.4/GH 3
4
•
451632 – D 3.4/GH 5
4
•
451645 – D 3.8/GH 3
• 2
451642 – D 3.8/GH 5
2
•
451655 – D 4.5/GH 3
• 2
451652 – D 4.5/GH 5
2
•
451665 – D 5.5/GH 3
• 2
451662 – D 5.5/GH 5
2
FRIADENT Transfer Coping (Slim )
2
•
451239 – D 3.4
•
451249 – D 3.8
•
451259 – D 4.5
The FRIADENT Transfer Coping (Slim) is used with the FRIADENT Gingiva Former
(Slim) to contour soft tissue with limited mesio-distal space.
(D 3.0 – D 5.5)
20
3 mm
5 mm
pRoD. No. DEsCRIpTIoN
•
464304 FRIADENT Standard Abutment Screw D 3.0
4
••••
454305 FRIADENT Standard Abutment Screw
•
461605 FRIADENT PickUp Guide D 3.0
4
••••
451615 FRIADENT PickUp Guide
4
Abutment screws and guide pins are seated with the 1.22 mm
FRIADENT Hex Driver or the 2.0 mm (blade width) FRIADENT Slot
Screwdriver.
TRANsFERCAps
FRIADENT TransferCaps allow greater precision, especially in a rotational axis, when
taking impressions. The implant's inner geometry is transferred with greater accuracy
resulting in the best possible fit of the superstructure.
FRIADENT TransferCap Multi-Pack
20
(3 pieces)
•
451629 – D 3.0
•
451639 – D 3.4
•
451649 – D 3.8
•
451659 – D 4.5
•
451669 – D 5.5
29
4