Electrical Connection - Electrolux ERW0670A User Manual

7.2 Electrical Connection

Caution! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
Warning! This appliance must be
earthed. The manufacturer declines
any liability should these safety
measures not be observed.
Consult a qualified electrician or service
technician if the grounding instructions
are not completely understood, or if doubt
exists as to whether the appliance is prop-
erly grounded.
7.3 Installation dimensions (mm) and ventilation requirements
450
448
min. 200 cm
min. 200 cm
2
450
443
5
2
Warning! We recommend that you
wait 4 hours before connecting and
installing the appliance to allow the
refrigerant to flow back into the
compressor.
Before plugging in, ensure that the volt-
age and frequency shown on the rating
plate correspond to your domestic power
supply.
The appliance must be grounded.
The power supply cable plug is provided
with acontact for this purpose.
If the domestic power supply socket is
not grounded, connect the appliance to a
separate ground in compliance with cur-
rent regulation.
Consult a qualified electrician.
The airflow behind the appliance must be
sufficient.
Make sure that the mains cable can
move freely.
ENGLISH 11