This appliance is for use with natural gas (g20). when converted using conversion
kit no. 0595241 this appliance is for use with propane gas (g31). (25 pages)
Page 1
Please keep these Instructions safe. Should you move house, please hand them over to the next occupier. Baxi Bermuda SL3 Fireside Gas Central Heating Unit User’s Operating Instructions...
Page 2
Everyone who works at Baxi has a commitment to quality because we know that satisfied customers mean continued success. We hope you get a satisfactory service from Baxi. If not, please let us know. Baxi is a BS-EN ISO 9001...
Page 3
Codes of Practice, most recent version Warnings should be used In GB the following Codes of Practice apply: Safe Installation Standard Scope BS 6891 Gas Installation. BS 5546 Installation of hot water supplies for The appliance is suitable only for installation in domestic purposes.
Introduction OPERATING THE UNIT Your Baxi Bermuda SL3 is a central heating boiler combined with a gas Push in and turn the fire control fire. Normally the fire will heat the knob to the OFF position ( ). room in which it is situated and the...
Controls Cover Panel If the indicator light is illuminated Turn the boiler thermostat knob to the Fire Control red/or flashing red, it is necessary to Bermuda SL3 OFF position ( ). The pilot will Knob reset the appliance. To do this turn remain alight.
The minimum clearance spaces CLEARANCES AROUND around the Baxi Bermuda SL3 are: THE FIRE Top: 76mm (3 in) These clearances must not be Side: 63mm (2 reduced or obstructed in any way. All clearances are essential in order to allow correct servicing of the appliance and access to the fire control knob.
The coal bed may be retouched using undamaged. black stain. This is available direct from IGNITION WITH A MATCH Baxi or your local Baxi Spares stockists. Quote Part No 043224 when ordering. Ensure that the fire and bulbs are Fender and...
Page 8
Guarantee 1. Your Baxi Bermuda is designed and produced to meet all the relevant Standards. 2. Baxi provide a 3 year guarantee on the Bermuda - other parts of the system are covered by the Installer or other manufacturers. The guarantee operates from the date installation is completed for the customer who is the original user.