Rinnai infinity 32 Operation Manual page 26

OPERATION WITH DELUXE TEMPERATURE CONTROLLERS
Step 2 Ð Ac tivate the automatic bath fill function and follow the voice prompts.
(a) Ensure the system is switched on. When the system is ON, the monitors will be lit. Ensure
the Ô TransferÕ button is lit. If not, press the Ô TransferÕ button once.
(b) Press Ô Bath fillÕ button. The Ô Bath fillÕ button
will light up and the buzzer will sound. The
ÔB athÕ indicator on the Kitchen Controller
monitor will light up. The voice will say Ò The
hot water system is ready. Open the hot water
tap.Ó
(c) Open the hot water tap for the bath. The
combustion indicator on all Temperature
Controller will light up and the bath will start to
fill.
During bath fill, the time display on the Bathroom Controller will slow the remaining bath
fill volume and will Ô count downÕ as the bath is filled.
NOTE
If you wish to stop the water flow whilst the bath fill function is in operation, simply press
the Ô Bath fillÕ button. The Ô Bath fillÕ button will flash and the voice will say Ò Turn off all
hot water taps and press the Ô Bath fillÕ buttonÓ . Follow these instructions.
(d) When the bath is filled to the programmed volume and temperature (see Ô Step 1Õ ):
the flow from the bath hot water tap will stop;
the Ô Bath fillÕ button on the Bathroom Controller(s) and the Ô BathÕ indicator on the
Kitchen Controller monitor will flash;
the buzzer will sound;
the voice will say Ò Bath fill is complete. Turn off the bath hot water tap and push the
Ô Bath fillÕ button.Ó
(e) IMPORTANT Ð Cl o se the hot water tap for the bath. This is very important to prevent over
filling of the bath.
(f) Press the Ô Bath fillÕ button. This is also important. It tells the hot water unit that the customer is
aware that the bath fill function has been completed and that the hot water tap for the bath has
been shut. The hot water unit will not allow hot water to flow from any fixture until the Ô Bath
fillÕ button has been pressed.
The Bath fill button light on the Bathroom Controller and the Ô BathÕ indicator on the Kitchen
Controller monitor will go out.
NEVER LEAVE YOUNG CHILDREN UNATTENDED IN THE BATH.
When using the Ô Bath fillÕ function, ALWAYS close the hot water tap for the bath after the
bath has filled and flow has stopped.
CAUTION
C
Bath Fill
C
- 25 -
Bath temp.
ON/OFF
Water Vol.
Transfer
Sound
Vol.
Hot water temp.
BC - 70 - 1A