Standard Temperature Controllers - Rinnai infinity 32 Operation Manual

STANDARD TEMPERATURE CONTROLLER
Standard Kitchen Temperature Controller (MC-33-3A)
Temperature Controllers are not required to operate the unit, they are a feature that provides control
over water temperature. Rinnai Infinity water heaters can be operated with 1, 2, 3 or no Temperature
Controllers.
DIGITAL
MONITOR
Indicates the temperature
selected. Error message
flashes in the event of a
fault.
MC-33-3A
Identifies this remote
control as for use in the
Kitchen.*
* This Temperature Controller is also suitable for installation in laundry areas.
Use this control in installations where only one controller is required.
ON INDICATOR
Indicates which temperature
controller is in control of
adjusting water temperature.
o
C
APPROX WATER TEMP
TEMPERATURE
CONTROL
MC - 33 - 3A
THERMOSTAT
To alter the temperature of
the water.
- 9 -
OPERATION
INDICATOR
Indicates that a hot water tap
is open (in any location).
T
ON IN USE
/
Power switch to operate.
ON / OFF
.