Advertisement
Assembly
You will need a Phillips screwdriver for assembly.
Attach handle
1. Locate the handle and the two screws
taped to the handle.
2. Slide the handle downward over the body
of the vacuum.
3. Insert two screws and fasten using screwdriver.
Attach hose and tools
1. Remove hose from package
2. Insert the hose with elbow end facing
downwards and align locking tab with slot.
3. Rotate clockwise until snapped into place
4. Take the opposite end and use the hose
end to open the foot base door, insert into
foot, and push into place.
5. Stretch hose and clip into the side and
upper hose clips.
6. Install extension wand and crevice tool in
the back of the unit as shown.
7. Remove Pet TurboEraser Tool from
packaging. Install on front of vacuum by
inserting end upward into the handle. There
will be a click when fully installed.
8. The Pet Hair Eraser Tool does not store
on-board (see Tools section for usage).
9. Take cord and wrap around the two cord
wraps located on the back of the vacuum.
Filter assembly
1. Remove the dirt tank by pushing release
button on tank handle and lifting away.
2. Remove instruction tag and discard.
3. Remove Febreze® foam filter from packaging
and install into vacuum, yellow side down.
4. Replace dirt tank back onto vacuum. There
will be a click when tank is locked into place.
Febreze and related trademarks are owned by the Procter & Gamble Company, Cincinnati, Ohio and used under license by Bissell Homecare, Inc.
WARNING
Plastic film can be dangerous. To avoid
danger of suffocation, keep away from
babies and children.
2.
2.
5.
7.
1.
3.
www.BISSELL.com
3.
4.
6.
8.
5
Hide quick links:
Advertisement
