HP 5120 series Configuration Manual page 156

To do...
Display the temperature
information of the device
Display the operating state of fans
in the device
Display the usage of the memory of
the device
Display the power state of the
device
Display the reboot mode of a
device
Display state of the RPS.
This command is available on only
HP 5120-24G-PoE+ SI Switch
(JG091A) model.
Display the configuration of the
scheduled task configured by the
schedule job command
Display the reboot time of a device
Display the configuration of
scheduled tasks configured by the
job command
Display the exception handling
methods
Use the command...
display environment [ slot slot-number ]
[ | { begin | exclude | include }
regular-expression ]
display fan [ slot slot-number [ fan-id ] ]
[ | { begin | exclude | include }
regular-expression ]
display memory [ slot slot-number [ cpu
cpu-number ] ] [ | { begin | exclude |
include } regular-expression ]
display power [ slot slot-number
[ power-id ] ] [ | { begin | exclude |
include } regular-expression ]
display reboot-type [ slot slot-number ]
[ | { begin | exclude | include }
regular-expression ]
display rps [ slot slot-number [ rps-id ] ]
[ | { begin | exclude | include }
regular-expression ]
display schedule job [ | { begin |
exclude | include } regular-expression ]
display schedule reboot [ | { begin |
exclude | include } regular-expression ]
display job [ job-name ] [ | { begin |
exclude | include } regular-expression ]
display system-failure [ | { begin |
exclude | include } regular-expression ]
149
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view