Network Connection; Connecting To The Network - Panasonic PT-RZ31K Operating Instructions Manual

Network connection

The projector is equipped with the network function, and following is possible by connecting to a computer.
f Web control
Setting, adjustment, and displaying status of the projector are possible by accessing the projector from a
computer.
Refer to "Web control function" (x page 176) for details.
f Smart Projector Control
You can use the application software "Smart Projector Control" to set and adjust projectors connected to a LAN
using a smartphone or tablet.
Visit the Panasonic website (http://panasonic.net/avc/projector/) for details.
f Multi Monitoring & Control Software
"Multi Monitoring & Control Software", which is a software application to monitor and control multiple display
devices (projector or flat panel display) connected via LAN, can be used.
Refer to the Operating Instructions of the "Multi Monitoring & Control Software" in the supplied CD-ROM for
details.
f Early Warning Software
"Early Warning Software", which is a software application to monitor the status of the display devices (projector
or flat panel display) or the peripheral device within the intranet, and to notify the problem or to detect the sign of
possible problem of the device, can be used.
Visit the Panasonic website (http://panasonic.net/avc/projector/pass/) for details.
f PJLink
Operation or status query of the projector can be performed from a computer using the PJLink protocol.
Refer to "PJLink protocol" (x page 210) for details.
f Art-Net
Setting of the projector can be operated by the DMX controller or application software using the Art-Net protocol.
Refer to "Using Art-Net function" (x page 211) for details.
f Command control
Operation or status query of the projector can be performed from a computer using the control command.
Refer to "Control commands via LAN" (x page 215) for details.

Connecting to the network

This projector can receive the Ethernet signal from the twisted-pair-cable transmitter together with the video and
serial control signal via the LAN cable.
Example of a normal network connection
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f A LAN cable is required to use the network function.
Chapter 5 Operations — Network connection
Computer
LAN cable (straight)
Hub
Projector
LAN cable (straight)
ENGLISH - 173